Minggu, 02 Desember 2012

Make your own power-saving devices


Make your own power-saving devices
Have you ever heard of power-saving devices? Whether there is a power-saving devices? the answer is Yes, there is! This tool is usually available at electronics stores and the price is certain enough to drain your pockets. especially if the seller is a dealer sales where the product is in the form of electricity-saving devices in the MLM. This time we can make your own with a much cheaper price ...

Then how do I work this power-saving devices to be able to 'save electricity'?? what exactly is in the 'saving'?? maybe you are still confused about this. the point of this tool can really save electricity in your home of 10-25%. The way the device works is simply reducing the amount of cosine curve AC current will be read on the meter gauge kilometers in your home. Announcing large objects attached to the outside wall of your house and on it as there is a rotating disc?? Well, the tool will work if there is a load in the form of air passing through the coil wire sensor to measure the amount of air that flows through it. Or is the scientific theory of how we can reduce as much as possible the peak (peak of the magnitude of the AC curve (sine-cosine) for readability so low.

In the world of electrical engineering (since I was a graduate electrical engineering), the components that affect the flow of air is condenser or capacitor and inductor windings or. you can do is mamfilter AC current before it enters the power grid in your home. In this way legal and allowed by the PLN itself because we would not be stealing electricity at all before the meter counter current menenpel on the outside wall of your house.

Then how do I make it?? Make it look like the following scheme ...

Create a series of plastic on top of the box strong and on. better be filled with cement to gip's or wasted heat energy well. Furthermore, be careful not to hit no electrical wires to the can or you will be electrocuted. then just ground wires or a period (if any) in hubingkan with cans. the closer location of the installation tool with a mile then the optimal performance. then use capacitors with good quality, the more expensive the better (it costs about 30 thousand). to SW is MCB which serves as a safety net in the event of a short circuit caused by capacitors.

The circuit above is very easy to make. so there's no excuse for not making it. all learning .. and ... see for yourself the usefulness, with regular power pemakaain relatively similar. you can feel the savings of about 25%.

If any difficulties or have questions to ask please share here. Good luck: D

Tidak ada komentar:

Posting Komentar